Installation 2
Monitor UV-900 User Manual 18-1120-05 Edition AF
9
2 Installation
2.1 Unpacking
Unpack the instrument and check the items against the supplied packing list.
Inspect the items for obvious damage which may have occurred during
transportation
.
• The system should be installed on a stable laboratory bench providing a
suitable working area.
• To maintain correct ventilation, the system requires an appropriate
amount of free space. Do not block the ventilation inlets or outlets on the
system!
It is recommended that all packing materials should be retained if onward
transport of the instrument is expected.
2.2 General precautions
The instrument should not be installed in a corrosive atmosphere or in an
atmosphere where deposits are liable to form on the optical surfaces.
The instrument should be located in a place of low temperature variations,
away from heat sources, draughts and direct sunlight.
The instrument may be operated at normal ambient temperatures in the range
+4 to +40 °C.
The instrument should be installed on a stable laboratory bench or in
ÄKTA
™
explorer or ÄKTApurifier. To ensure correct ventilation a free space of
0.1 m is required behind and in front of the instrument. Place the instrument
directly on the bench. Do not use any soft material under the instrument, to
ensure that the ventilation inlet in the front is not blocked.
CAUTION!
The following information should be r ead car efully to ensur e that
the instrument is installed correctly.
Monitor UV
-900
To Next Page
Loading...
Need help?
General
