GE Monitor UV-900 - Chemical Resistance and Tubing; Physical and Environmental Data; Safety and Compliance Standards

C Reference information
40 Monitor UV-900 User Manual 18-1120-05 Edition AF
Physical data
Chemical resistance The wetted parts are resistant to organic
solvents and salt buffers commonly used
in chromatography of biomolecules,
except 100% Ethyl acet ate, 100%
Hexane, and 100% Tetrahydrofuran (THF)
Tubing connections UNF 10-32 "fingertights" for capillary
tubing with 1/16” outer diameter
Light source Xenon flash lamp
Lamp lifetime > 4000 hours
Control Stand alone or from a computer running
UNICORN 3.21 or higher through
UniNet-1 connection
Power consumption 65 V A
Power requirement 100–240 V AC, 50–60 Hz
Analogue output 3 signals, 0–1 V full scale, overrange function
Digital inputs 5 V, 1 mA current sinking, lamp on/off,
autozero, event mark
Display 2 rows with 20 characters each
Dimensions (H xW xD) 200 x 260 x 370 mm
Weight 8. 5 kg
Degree of protection IP 20
Compliance with standards
The declaration of conformity is valid for the
instrument only if it is:
• used in laboratory locations
• used in t he same st ate a s i t was deliver ed
from GE Healthcare except for
alterations described in the User Manual
• connected to other CE labelled
GE Healthcare modules or o ther products
as recommended.
Safety Standards This product meets the requirement of the
Low Voltage Directive (LVD) 73/23/EEC
through the following harmonized standards:
• EN61010-1
• IEC 61010-1
• CAN/CSA-C22.2 No. 61010-1
• UL61010-1