CHAPTER 6: USING THE METER GE COMMUNICATOR PROGRAMMING OVERVIEW
EPM 2200 POWER METER – INSTRUCTION MANUAL 6–23
Current, CT, PT and Energy Settings will cause invalid energy accumulator values.
Change the inputted settings until the message disappears.
SETTINGS
Note
The EPM 2200 Meter is shipped with Password Disabled; there is NO DEFAULT
PASSWORD)
The fields are as follows:
• Enable Password for Reset: click to enable
• Enable Password for Configuration: click to enable
• Change Password: click to change
• Device Designation: optional user-assigned label
To Next Page
Loading...
