GE MEDICAL SYSTEMS PRECISION RXI SYSTEM PRE-INSTALLATION
D
IRECTION 5123449-100, REVISION 12
_____________________________________________________________________________________________
Page 16 / 111 June 2009
3. Introduction
3.1. Objective and Scope of Pre-Installation
This document is intended as a guide and informational resource for planning and properly preparing a location for
the installation of a Precision RXi R&F system. This document is intended to assist the customer and installer in
properly preparing a site for product installation.
3.2. Avoiding Unnecessary Expenses and Delays
To avoid unnecessary expenses and delays, use the “Pre-Installation” checklist located in “Chapter 7” to determine
if you are ready for the installation to begin. Once you believe that your room/location is ready for installation to
begin, complete the “Pre-Installation” checklist. The checklist is an important tool that helps verify that nothing has
been missed. The checklists summarizes the preparations and allows you to record a permanent record of the
activities that have taken place.
3.3. An Overview of the Pre-Installation Process
Pre-installation is a co-operative effort between the customer/purchaser and GE Medical Systems (GEMS). Figure
1-1 outlines the information in this document and its place in the pre-installation process.
Figure 1-1 Pre-Installation Process
To Next Page
Loading...
Need help?
General
