GE Proteus XR/a

PROTEUS XR/a
GE MEDICAL SYSTEMS Operator Manual
REV 11 DIRECTION 2259724-100
3-2
10 Tomolink (optional)
• Tomolink System Console
• Control Electronics Wall Box
• Table/OTS Coupling Hardware
• OTS Drive
11 Printer (optional)
ANY OPTIONAL AND REPLACED COMPONENTS SHOULD BE
COMPATIBLE WITH THE SYSTEM AND BE AUTHORIZED BY GE
COMPANY, OTHERWISE THEREOF THE LOSS OR DAMAGE IS
NOT THE RESPONSIBILITY OF GE COMPANY.
ILLUSTRATION 3-1
PROTEUS XR/A SYSTEM COMPONENTS
The Proteus XR/a System is divided into basic components:
1. System Console 7. X-ray Tube
2. Elevating Table 8. Proteus XR/a Collimator
3. Overhead Tube Suspension 9. Eclipse Proteus Collimator
4. Wall Stand (GPCP No.: 2260354) (optional) 10. Tomography (optional)
5. SG120 Wall Stand (GPCP No.: 2402562)
(optional)
11. Printer (optional)
6. Generator Cabinet
1
2
3
4
6
7
8/9
WARNING
5
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).