Chapter 2. Installation
TransPort
®
PT900 User’s Manual 23
2.5.6b Odd-Traverse Installations (cont.)
2. Place the yoke on the top of the pipe (see Figure 26 below). If the required
transducer spacing is <305 mm/12 in., the yoke chain must be placed
within the clamping fixture as shown.
Figure 26: Yoke Placement On Top of Pipe
3. Wrap the yoke chains around the pipe and secure them to the yoke bracket,
as shown in Figure 27 below.
Figure 27: Yoke Chains Secured
[Spacing
[Spacing
>305 mm/12 in.]
<305 mm/12 in.]
To Next Page
Loading...
