GE Vivid E80

Replacement Procedures
8-6 Vivid E80/E90/E95 – Service Manual
GC091052
Rev. 3
14.
HEX KEY 8 mm (UNBRAKO KEY /
ALLEN KEY)
15.
HEX KEY 10 mm (UNBRAKO KEY /
ALLEN KEY)
16.
HEX KEY M12 REAR
CASTERS:
130 Nm
(UNBRAKO KEY /
ALLEN KEY)
17.
Nut Driver 5 mm
18.
Nut Driver 3/16 inch
19.
Torque
Wrench
Up to 130 Nm Heavy mechanical parts may need
a specific torque. Each procedure
will indicate the torque needed.
20.
WHEEL
CHANGE KIT
N/A N/A FC200829
• Wooden
wedge
• Bevel edged
board
Table 8-1: Tools used for servicing the Vivid E80/E90/E95 (Cont'd)
ITEM NO. TOOL SIZE TORQUE COMMENTS