Introduction
1-14 Vivid E80/E90/E95 – Service Manual
GC091052
Rev. 3
Electrical safety
Safe practices
Follow these guidelines to minimize shock hazards whenever
you are using the Vivid E80/E90/E95:
• To minimize shock hazard, the equipment chassis must be
connected to an electrical ground.
• The Vivid E80/E90/E95 is equipped with a three-conductor
AC power cable. This must be plugged into an approved
electrical outlet with safety ground.
• The power outlet used for this equipment should not be
shared with other types of equipment.
• Both the Vivid E80/E90/E95 power cable and the power
connector must meet international electrical standards
Connecting a Vivid E80/E90/E95 to the wrong voltage level will
most likely destroy it.
To Next Page
Loading...
