16
Settings
If your hot tub uses a circulation pump configured to run 24 hours, the screen will show you the purge setting instead
of filtration� The purges are pre-programmed for a fixed number of minutes; therefore, only the start time and frequency
can be modified�
To program the purge, you must enter these settings: Start time and Frequency� Once you have confirmed, you will be
brought back to the Settings menu�
Purge*
Start:
start time of first purge
Frequency:
number of times the purge is
executed during a day
*This section only applies if the in.touch app option was not purchased
To Next Page
Loading...
