19
From the Settings menu, you can access the in�temp menu, which gives you access to the following heat pump modes:
• Eco Heat
• Smart Heat
• Eco Auto (when applicable)
• Smart Auto (when applicable)
• Cool (when applicable)
• Electric
Turn to make a selection and press to confirm�
Eco Heat In this mode, the heat pump is used as the unique source of heating� The heating element is kept off and the
heat pump is not used to cool the water should its temperature rise above the current set point�
Smart Heat This mode uses the heat pump as the main heating source� The heating element is turned on only if there is
a large temperature difference between the water and the set point� The heat pump is not used to cool the water in this
mode�
Eco Auto This mode borrows functionality from both Eco Heat and Cool modes (when applicable) and has the ability
to select the proper Heat or Cool mode automatically according to the water temperature� The heating element is never
activated in this mode�
Smart Auto This mode borrows functionality from both Smart Heat and Cool modes (when applicable) and has the
ability to select the proper Heat or Cool mode automatically according to the water temperature� The heating element is
activated only if there is a large temperature difference between the water and the set point�
Cool This mode uses the heat pump in cooling mode only (when applicable)� The heat pump is not used as a heating
source and the heating element is never activated�
Electric This mode keeps the heat pump off and uses only the heating element to regulate water temperature�
in.temp
Settings
To Next Page
Loading...
