45
SHENZHEN GETECH TECHNOLOGY CO LTD
(See picture 6-32) and then click the save button to generate a .gcode file. Copy the gcode file to
the SD card.
(Picture 6-32)
Insert the SD card into the slot which is on the right side of the LCD screen. Press the knob to
enter the main menu and choose “Print from SD”. See picture (6-33)
(Picture 6-33)
Choose the corresponding gcode file to start printing.
Note:
The printer can only read gcode file and the file name should be English letters, a space, an
underscore or their combination.
The Gcode file cannot be placed in any folder of the SD card, otherwise it cannot be read.
To Next Page
Loading...
