SHENZHEN GETECH TECHNOLOGY CO., LTD
17
may take some trial and error to achieve the best result. An example of good first layer, see
picture (6-7).
(Picture 6-7)
Note:
• If turn the knobs clockwise, the platform will rise, and vice versa.
• Avoid the nozzle touching the bed; use a piece of A4 paper. Or it will scratch the bed.
For more details, please refer to this link:
http://geeetech.com/forum/viewtopic.php?f=112&t=62296
6.2 TF card printing
Insert the TF card into the slot. See picture (6-8).
(Picture 6-8)
Press and rotate the knob to enter the main menu. Select the option of "Print from SD". See
picture (6-9).
To Next Page
Loading...
