Geeetech A20 User Manual

SHENZHEN GETECH TECHNOLOGY CO., LTD
44
10.5 Print stopped
• USB printing: the signal is interfered. Please copy the model to TF card and print via TF card.
• TF card printing: the gcode file in the TF card is abnormal, please slice again.
• The quality of the
TF card is poor. Please try another TF card.
• The power supply voltage in the area is not stable; please print after the voltage is
stable.
Visit our official forum for more information:
http://www.geeetech.com/forum/viewtopic.php?f=98&t=61864

Geeetech A20 Specifications

General

Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	USB, SD card
Print Technology	FDM (Fused Deposition Modeling)
Frame Material	Aluminum
Heated Bed	Yes
Display	LCD Screen
Machine Weight	7.8 kg
Supported Materials	PLA, ABS
Bed Temperature	100°C
Nozzle Temperature	250°C
Power Supply	110V / 220V
Layer Resolution	0.1-0.3mm