Geeetech A20 User Manual

SHENZHEN GETECH TECHNOLOGY CO., LTD
27
English interface for your reference (picture 8-5).
(Picture 8-5)
Using the Repetier-Host for the first time, printer parameters need to be configured before
connecting. Click “Printer settings” on the top right corner, see picture (8-6).
(Picture 8-6)
The following window pops up, and you can fill in according to the contents of the label. (Pay
attention to the highlighted parts)
a. Connection dialog
：see picture (8-7)

Geeetech A20 Specifications

General

Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	USB, SD card
Print Technology	FDM (Fused Deposition Modeling)
Frame Material	Aluminum
Heated Bed	Yes
Display	LCD Screen
Machine Weight	7.8 kg
Supported Materials	PLA, ABS
Bed Temperature	100°C
Nozzle Temperature	250°C
Power Supply	110V / 220V
Layer Resolution	0.1-0.3mm