Geeetech Prusa I3 pro W - Repetier Host User Manual; Common Troubleshooting Issues

www.geeetech.com
ShenZhen GETECH
CO.,LTD
31
5.3 User manual of Repetier Host
For detailed user manual of Repetier Host, please refer to Wiki:
http://www.geeetech.com/wiki/index.php/Repetier-Host
5.4 Possible causes for motor’s non-action
http://www.geeetech.com/forum/viewtopic.php?f=13&t=17038
5.5 Extruder does not work normally
http://www.geeetech.com/forum/viewtopic.php?f=13&t=17097
5.6 The hotbed or extruder can not be heated
http://www.geeetech.com/forum/viewtopic.php?f=13&t=17039
5.7 LCD error： MAX/MIN TEMP error
http://www.geeetech.com/forum/viewtopic.php?f=13&t=17030
5.8 No information or displaying black square on LCD
http://www.geeetech.com/forum/viewtopic.php?f=13&t=17040
5.9 Time.h/endstop hit or other abnormalities
http://www.geeetech.com/forum/viewtopic.php?f=13&t=17037