118
4. CONFIGURATION
4.20.9. MSG.TM - Selecting the message assigned to the active count
Acronym Scrolling message Submenu Attributes
MSG.TM MSG NUMBER WHEN TIMER OVER TIMER R W
The parameter shows and sets the number of the message assigned to the active timer count, i.e., the scrolling message
shown on the display.
For more information on scrolling messages, see paragraph “3.1.2.2. Scrolling messages” on page 34.
If the parameter is set to “0” no message will be displayed during the active timer count
Unit of measurement
: Message number
Options: 0...25