gefran 650 - CODE - Identification Code; KBAUD - Selecting Communication Speed; Par - Selecting Parity

122
4. CONFIGURATION
4.22.1. CODE - Identification code
Acronym Scrolling message Submenu Attributes
CODE INSTRUMENT ID CODE FOR SERIAL COMM SERIA R W
The parameter shows and sets the identifying code of the controller in a Modbus serial network.
Unit of measurement:
Number
Options: 1...247
4.22.2. KBAUD - Selecting communication speed
Acronym Scrolling message Submenu Attributes
KBAUD COMMUNICATION SPEED SERIA R W
The parameter shows and sets the communication speed for the serial port.
Unit of measurement
: kbaud
Options: 1.2 = 1200 baud
2.4 = 2400 baud
4.8 = 4800 baud
9.6 = 9600 baud
19.2 = 19200 baud
38.4 = 38400 baud
57.6 = 57600 baud
115.2 = 115200 baud
4.22.3. PAr - Selecting parity
Acronym Scrolling message Submenu Attributes
PAr PARITY SERIA R W
The parameter shows and sets the parity used in serial communication.
Unit of measurement
: -
Options: NONE = No parity
ODD = Odd parity
EVEN = Even parity
Gefran 650/1250/1350 Temperature Controller – Abbreviated Manual
40524-04 Rev0