Generac Power Systems Power Zone Pro Sync User Manual

Owner’s Manual for Power Zone Pro Sync 5
General Information
Section 2 General Information
Equipment Description
The Generac Power Zone Pro Sync is a system of
controllers that communicate with one another to power
and control all facets of a Generac Power Zone Pro Sync
Generator. A Power Zone Pro Sync system is very
customizable, as not all controllers are needed to operate
a generator. A Power Zone Pro Sync Main Controller and
Power Zone Pro Sync Display are the two most essential
pieces, as they are required on every generator for it to
operate.
Symbol Definition
Features
• HMI Display Interface Viewable via Most Wi-Fi
®
or
Bluetooth
®
Devices
• System Configurable via HMI Display and Most Wi-
Fi or Bluetooth Devices
• Remote Communication via Modbus
®
RTU,
Modbus TCP/IP, 10/100 Mbs Ethernet IEEE 802.3,
SNMPv1 and SNMPv2c, Wi-Fi, or Bluetooth
• Modbus RTU over RS-485 (Optional)
• Configurable Analog and Digital I/O
• Configurable Monitoring of Analog I/O, Digital I/O,
and Machine State Data
• Configurable Detection and Mitigation of Faults
with E-Mail Annunciation
• Configurable Logging of Faults and Events with
Associated Data Capture
• Configurable Logging and Trending of Data
• Digitally Controlled Generator Output Voltage and
Frequency Regulation
• Standard Control Hardware Accommodates
Standalone and Parallel Operation
• Customer Programmable Built-in Multichannel PLC
Logic Controller
• Support of Third-party Controlled Paralleling
Operation
• Alternator I
2
T with 300% Current Limiting for
Breaker Coordination
• Alternator Ground Fault Indication
Additional Standard Parallel Control Features:
• Reverse Power Protection
• Synchronization with Other Gensets and/or Utility
• Power (kW and kVAR) Sharing with Multiple
Generators or Utility
Standard System Control Features:
• Built-in PLC Logic Eliminates the Need for External
Controllers Under Most Conditions
• Ethernet Based Communications Between
Gensets
• Programmable I/O Channel Properties
• Built-in Diagnostics
Parameters Monitored on Display
• Keyswitch Position Indication
• Amps per Phase - Utility and Generator
• Line to Line and Line to Neutral Volts - Utility and
Generator
• Power Factor - Utility and Generator
• Real Power (kW) - Utility and Generator
• Apparent Power (kVA) - Utility and Generator
• Reactive Power (kVAR) - Utility and Generator
• Frequency - Utility and Generator
• Engine Speed
• Engine Coolant Temperature
• Engine Oil Pressure
• Engine Oil Temperature
• Battery Voltage
• Shutdown Messages
• Diagnostics
• Maintenance Events/Information
• Engine Run Hours
AC Generator
Utility
AC Voltage
DC Voltage
G

Generac Power Systems Power Zone Pro Sync Specifications

General

Brand	Generac Power Systems
Model	Power Zone Pro Sync
Category	Controller
Language	English