07
7-83
6\VWHPRSHUDWLRQ
Operating conditions
Smart Cruise Control will operate when
the following conditions are satisfied.
Basic function
• The gear is in D (Drive)
• The driver’s door is closed
• EPB (Electronic Parking Brake) is not
applied
• Your vehicle speed is within the
operating speed range
- 5~120 mph: when there is no vehicle
in front
- 0~120 mph: when there is a vehicle
in front
• ESC (Electronic Stability Control), TCS
(Traction Control System) or ABS is on
• ESC (Electronic Stability Control), TCS
(Traction Control System) or ABS is not
controlling the vehicle
• Engine rpm is not in the red zone
• Forward Collision-Avoidance Assist
brake control is not operating
• Remote Smart Parking Assist brake
control is not operating
• ISG system is not operating
• Hands-off warning for Lane Keeping
Assist and Highway Driving Assist is
off
Information
At a stop, if there is no vehicle in front of
your vehicle, the system will turn on when
the brake pedal is depressed
Overtaking Acceleration Assist
Overtaking Acceleration Assist will
operate when the turn signal indicator is
turned on to the left whilst Smart Cruise
Control is operating, and the following
conditions are satisfied:
• Your vehicle speed is above 40 mph
• The hazard warning flasher is off
• A vehicle is detected in front of your
vehicle
• Deceleration is not needed to
maintain distance with the vehicle in
front
:$51,1*
• When the turn signal indicator is
turned on to the left whilst there
LVDYHKLFOHDKHDGWKHYHKLFOHPD\
DFFHOHUDWHWHPSRUDULO\3D\DWWHQWLRQ
WRWKHURDGFRQGLWLRQVDWDOOWLPHV
• 5HJDUGOHVVRI\RXUFRXQWULHVGULYLQJ
GLUHFWLRQ2YHUWDNLQJ$FFHOHUDWLRQ
Assist will operate when the
FRQGLWLRQVDUHVDWLVILHG:KHQ
using the function in countries with
GLIIHUHQWGULYLQJGLUHFWLRQDOZD\V
check the road conditions at all
WLPHV