Driver assistance system
7-84
6\VWHPGLVSOD\DQGFRQWURO
Basic function
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
system.
OperatingOperating Temporarily cancelledTemporarily cancelled
OJX1070264EOJX1070264E OJX1070082EOJX1070082E
• When operating
(1) Whether there is a vehicle ahead
and the selected distance level are
displayed.
(2) Set speed is displayed.
(3) Whether there is a vehicle ahead and
the target headway are displayed.
• When temporarily cancelled
(1)
indicator is displayed.
(2) The previous set speed is shaded.
(3) Vehicle ahead and distance level are
not displayed.
Information
• The distance of the front vehicle on the
cluster is displayed according to the
actual distance between your vehicle
and the vehicle ahead.
• The target distance may vary according
to the vehicle speed and the set
distance level. If vehicle speed is low,
even though the vehicle distance have
changed, the change of the target
vehicle distance may be small.
To temporarily accelerate
OJX1070083EOJX1070083E
If you want to speed up temporarily
when Smart Cruise Control is on, depress
the accelerator pedal. Whilst the speed
is increasing, the set speed, distance
level and target distance will blink on the
cluster.
:$51,1*
Be careful when accelerating
WHPSRUDULO\EHFDXVHWKHVSHHGDQG
GLVWDQFHLVQRWFRQWUROOHGDXWRPDWLFDOO\
HYHQLIWKHUHLVDYHKLFOHLQIURQWRI\RX
To Next Page
Loading...
Need help?
General
