03
3-53
OJX1039119OJX1039119
1. Route the Child Restraint System top-
tether strap over the seatback. Placing
the top tether strap, please follow
the instructions of the Child Restraint
System manufacturer.
2. Connect the top-tether strap to the
top-tether anchorage, then tighten
the top-tether strap according to the
instructions of your Child Restraint
System’s manufacturer to firmly
attach the Child Restraint System to
the seat.
WARNING
Take the following precautions when
installing the top-tether:
• Read and follow all installation
instructions provided with your Child
Restraint System.
• NEVER attach more than one Child
Restraint System to a single ISOFIX
top-tether anchorage. This could
cause the anchorage or attachment
to come loose or break.
• Do not attach the top-tether to
anything other than the System
correct top-tether anchorage. It
may not work properly if attached to
something else.
• Child Restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
Child Restraints.
Under no circumstances are they
to be used for adult seat belts or
harnesses, or for attaching other
items or equipment to the vehicle.
Securing a Child Restraint System
with a lap/shoulder belt
When not using the ISOFIX system, all
Child Restraint Systems must be secured
to a rear seat with the lap part of a lap/
shoulder belt.
To Next Page
Loading...
Need help?
General
