Genicom LA36 - Paper Thickness

B-7
Printer and Paper Specifications
Paper Thickness
Paper thickness is given by the weight of the paper in either grams per square meter (g/m
2
)
or in pounds per bond (lbs/bond). The following table shows the allowable paper thickness
for one-part paper or for each sheet of multipart paper. The total thickness must not exceed
0.35 mm (0.014 inch).
The weight of carbonless or carbon-backed paper may vary, depending on the paper
manufacturer. When using paper of borderline thickness, test the paper before running a job.
Type of Paper Number of Parts Thickness
One-part Single 47-81 g/m
2
(40-70 kg or 12-22 lb)
Carbonless
Top 40-64 g/m
2
(34-55 kg or 11-17 lb)
Bottom 40-81 g/m
2
(34-70 kg or 11-22 lb)
Top 40-64 g/m
2
(34-55 kg or 11-17 lb)
Middle 40-64 g/m
2
(34-55 kg or 11-17 lb)
Bottom 40-81 g/m
2
(34-70 kg or 11-22 lb)
Top 40-64 g/m
2
(34-55 kg or 11-17 lb)
Middle 40-64 g/m
2
(34-55 kg or 11-17 lb)
Middle 40-64 g/m
2
(34-55 kg or 11-17 lb)
Bottom 40-81 g/m
2
(34-70 kg or 11-22 lb)
Top 40-52 g/m
2
(34-45 kg or 11-17 lb)
Middle 40-52 g/m
2
(34-45 kg or 11-17 lb)
Middle 40-52 g/m
2
(34-45 kg or 11-17 lb)
Middle 40-52 g/m
2
(34-45 kg or 11-17 lb)
Bottom 40-64 g/m
2
(34-55 kg or 11-17 lb)
kg: Weight in kilograms of 1000 sheets of 788 X 1091 mm paper (1.16 g/m
2
)
lb: Weight in pounds of 500 sheets of 17 X 22 inch paper (3.76 g/m
2
)