C-13
Command Sets
Function Command
Miscellaneous
Mnemonic Function Command Remarks
BEL Bell 0/7 C0 Control Code
DECSCL Select Conformance CSI Ps1 " p Ps = 0: reset - native level
Level Ps = 71: reset - DEC PPL1
Ps = 72: reset - DEC PPL2
DECSTR Soft Terminal Reset CSI ! p Reset to initial state
RIS Reset to Initial State ESC c Reset to initial state
DECIPEM IBM Proprinter CSI ? 58 h Deprecated function
Protocol Mode CSI ? 58 l
ROCS Return from Other ESC % @ Return to DEC PPL2 mode
Coding System
SOCS Select Other Coding ESC % = IBM Proprinter Protocol
System ESC % SP 2 Epson Protocol
CRM Control Representation CSI 3 h Print hex representation for all
Mode CSI 3 l characters
Reset
DECASFC Automatic Sheet CSI Ps ! v Ps = 0: No change
Feeder Control Ps = n: Tray n (reserved)
Ps = 4 : Tractor feeding
Ps = 99: Manual feed
DECSITF Select Input Tray CSI Ps1 ; Ps2 Ps1 = 0: Disable all composite
input
Failover ; . . . ; Psn SP w trays
Ps1 = n: Define composite tray n
Ps2–Psn = n: Add tray n to the
composite definition
DECUPM Unidirectional Print CSI ? 41 h Set unidirectional print mode
Mode CSI ? 41 l Reset unidirectional print mode
SnC1R C1 Transmit ESC SP 6 Process 7-bit, drop 8th bit
/DEC*C1 /Receive ESC SP 7 Process 7-bit and 8-bit
ESC SP F Transmit 8-bit as 7-bit equivalents
ESC SP G Transmit 8-bit (not supported)
To Next Page
Loading...
