Genicom LA36 - Bit Image Graphics; Cut Sheet Feeder Control; Miscellaneous

C-33
Command Sets
Function Command
• n
1
and n
2
set point size of font.
Point size = (n
1
+ n
2
X 256) X 0.5 point
(0 ≤ n
1
≤ 255) (0 ≤ n
2
≤ 127)
Copy resident character set to download area ESC : NUL (n) (s)
Create download font ESC & NUL (n
1
) (n
2
) (d
0
) (d
1
)
(d
2
) (data)
Bit Image Graphics
Graphics type m graphics ESC * (m) (n
1
) (n
2
) (data)
Bit image mode definition ESC ? (s) (n)
Single-density graphics ESC K (n
1
) (n
2
) (data)
Double-density graphics ESC L (n
1
) (n
2
) (data)
High-speed double-density graphics ESC Y (n
1
) (n
2
) (data)
Quadruple-density graphics ESC Z (n
1
) (n
2
) (data)
Select raster image graphics ESC ( G (n
1
) (n
2
) (d)
n
1
= 1, n
2
= 0
d = 1: Raster image graphics mode
Print raster image graphics ESC . (c) (v) (h) (m) (n
1
) (n
2
) (data)
Cut Sheet Feeder Control
Feed a sheet from bin 1 ESC EM 1
Feed a sheet from bin 2 ESC EM 2
Feed a sheet from bin 3
(*1)
ESC EM E
Eject a page from the printer ESC EM R
Miscellaneous
Sound the bell BEL
Move print head to home position ESC <
Unidirectional printing on/off ESC U (n)
(on: n = 1, off: n = 0)
Initialize printer ESC @
*1
This is an extended command not supported by the original protocol.