C-11
Command Sets
Function CommandCharacter Set I
2
F Designator Charactors
96-Character Sets
ISO Latin-1 Supplemental A 4/1
ISO Latin-2 Supplemental B 4/2
ISO Latin-9 Supplemental b 6/2
ISO Latin-Greek Supplemental F 4/6
ISO Latin-Hebrew Supplemental H 4/8
ISO Latin/Cyrillic Supplemental L 4/12
ISO Latin-5 Supplemental M 4/13
User Preference Supplemental < 3/12
Reports
Mnemonic Function Command Remarks
DA Device CSI c Request Device Attributes Report
Attributes
DAR Device ESC [ ? ps1 ; Ps2 Ps1 = 72
Attributes ; . . . ; Psn c Ps2–Psn describe extensions. See
Report (printer to host) the Programming Supplement.
DA2 Secondary CSI > Ps c Ps must = 0
Device
Attributes
DA2R Secondary ESC [ > Ps1 ; Ps2 ; Ps1 = 67: model LA30N
Device Ps3 ; Ps4 ; Ps5 c 68: model LA30W
Attributes (printer to host) Ps2 = firmware revision x 10
Report Ps3 = 0 (or 1 reserved)
Ps4 = 20
Ps5 = firmware edit revision
DECLANS Load DCS Ps v encoded_ Message is Hex. encoded.
ANSWERBACK
message_string ST
Without
Password
To Next Page
Loading...
