3-6
Printing
Installation Settings
Print Feature Factory Settings
Language English
Tear Auto, 1 second
Single sheet loading Auto, 2 second
Error beep One
Buffer 64K bytes
Interface type Automatic sense
Auto interface switch time 2 seconds
Baud rate 9600 bps
Bits and parity 8 bits and none
Buffer control XON/XOFF
Disconnected on fault No
Adjustments Settings
Print Feature Factory Settings
Fanfold adjust (continuous forms) 0/60 inch
Manual adjust (single sheets) 0/60 inch
Reserved 1 0/60 inch
Reserved 2 0/60 inch
To Next Page
Loading...
