Genie BDVR-8 - System Setup; General

BDVR Manual 48 Version 1.2
9. System Setup
9.1. General
１. Use the directional buttons [STWX] to select “SYSTEM” menu. Then, press [ENTER] button.
２. Use the Left/Right buttons [WX] to select menu tabs.
３. Use the Down button [T] to specify the detail.
４. Use the [-, +] buttons to change values.
５.
Save changes and exit the menu, press the [ENTER] button.
Exit the menu without making changes, press the [CANCEL] button.
ITEM ACTION
AUTO LOCK
yThe DVR locks all the buttons after three minutes of inactivity, like a
Screensaver. The buttons can be unlocked with the user password. Default is
“OFF”.
KEY TONE
y By default, the DVR emits a beep every time a button is pressed. Set the key
tone to OFF to turn button beep off. Default is “ON”
RECORD MODE
yCIF, 4/8Ch: Default setting
The system records each camera individually and then multiplexes them.
Each channel records at CIF resolution: 360x288.
• Field, 4/8Ch: The system records each camera individually and then multiplexes them.
Each channel records at Field resolution: 720x288.
• Frame, 4/8Ch: The system records each camera individually and then multiplexes
them. Each channel records at Frame resolution: 720x576
• Frame + CIF :
Channel number 1 - 720x576 + Channel number 2~8 - : 360x280
PB DEINTERLACE
y ON: Reduces image flickering but also reduces picture quality.
y OFF: Better picture quality for still images but may flicker for moving pictures.
RUN ON BOOT
y It’s purpose is to start REC, without pressing the REC button, when switched on.