Genie BDVR-8 - VII.search; Playback; Time Search

BDVR Manual 58 Version 1.2
VII.SEARCH/ PLAYBACK
1. Time Search
1. To start playback, press the [Time Search] button and the Time Search
Calendar Menu pops up, as shown below.
2. Use the Left /Right buttons to change the Month on this bar
3. Use the Up/Down buttons [ ] to select a “DAY” on the Calendar. Selected data is shown as
a graphical representation of the recorded video stored on the DVR.
4.
Select “Hour and Minutes“, or the camera you wish to playback, and press the
[ENTER] button.
5. Press the [ENTER] button to start playback.
Note: It does not change if there is no stored data in previous/next month.
Note: Data is colour-coded by category: Alarm (Red) - Motion (Green) – Normal (Yellow)
Note:
Time : Multi-Screen Display
Camera : Full Screen Display