May 2018 Service Manual
Ground Controls
Part No. 1275811GT GR
™
• QS
™
R • QS
™
W 51
2-3
Level Sensors
The Electronic Control Module (ECM) is
programmed to deactivate the lift and drive
functions and activate an alarm when a signal is
received from the level sensor.
The tilt alarm sounds when the incline of the
chassis exceeds 1.5° to the side and 3° to the front
or rear.
Use the illustrations to verify which type of level
sensor is installed and perform the procedure that
is appropriate for your machine.
Procedure 1
Procedure 2
Procedure 2
1 X axis
2 Y axis
To Next Page
