Preparation before Measurement Zipp02 | 21
3. Auto power off time
• NO OFF: Auto power off disabled
• 30 OFF: Turns power off if no action is done
within 30 min
4. Minimum display resolution
• DSP 1: minimum display being 1"
• DSP 5: minimum display being 5"
• DSP 10: minimum display being 10"
5. Setting of tilt sensor
• V TILT ON: Turn on the tilt sensor
• V TILT OFF: Turn off the tilt sensor
6. Inidication of horizontal angle
• NO BEEP: Horizontal angle indicator disabled
• 90 BEEP: Gives out beep when the instrument is
close to 0°, 90°, 180° and 270°
To Next Page
Loading...
