GeoMax ZOOM 10 - Page 109

Total Station Manual
108
ƻ
2 After finishing the
pre-settings (know
more details at the
beginning of chapter
5), press [F4] to start
COGO app.
[F4]
or
[4]
ƻ
3
In [COGO Menu]
screen, press the [F1]
or number key [1]
enter the [Traverse &
Inverse] screen, press
[F2] or [2] enter the
traverse
subapplication.
[F1]
or
[1]
[F2]
or
[2]
ƻ
4
There are four
ways to get the
known point for
traverse calculation.
A: Input the name of
known point in“Pt.”
field in [Traverse]
screen and press
[F1](Meas.) entry the
[COGO Meas]
Input prism height in
Input point
name
+
[F1](Meas.)
[F1](ALL)
or
[F2](DIST)
+
[F3](REC)
A: Get the known point by COGO-Meas.