Total Station Manual
72
ƻ
4 Press [F1](ALL) or press
[F2](DIST) and [F3](REC) to
start measuring and record the
measured data.
[F1]
or
[F2]+[F3
]
ƻ
5 Finish measuring,
application turn off the
function of measuring
individual point and then
continue to display the
consecutive point name.
5.2 Data
[Data]:
Look over the measured datas which are saved in current job.
Steps Key Display
ƻ
1 Press [F4]( Ę )twiceto
display the last page of soft
keys.
[F4]
ƻ
2
Press [F3](Data) to start
view measured point function.
[F3]
To Next Page
Loading...
