GeoMax ZOOM 10 - 5. Applications; 1. Setting the Job

Total Station Manual
37
3.2 Set Station and instrument height
After set the coordinate of station (the site of instrument) relatives to the origin,
the instrument can calculate the coordinate of the location to your position (the site of
prism).
You can set station and the instrument height conveniently in the Q-Survey.
Steps Key Display
ƻ
1 Aim at the target which
used to orient.Press [F4] twice
to enter third pages soft key.
[F4]
+
[F4]
+
[F2]
ƻ
2
Press [F1] (Station) to
enter the interface of Enter
STA.
Enter the name of station, the
instrument height and
coordinates.
After entering each item,
move the cursor to the next
edit text.
[F1]
ƻ
3
After finished entering,
press [F4] (OK) to save the
data of station and back to the
function of Q-Survey.
[F4]