GeoMax ZOOM 10 - 6. Stakeout; 6.1 Set Stakeout Point

Total Station Manual
63
ƻ
5 After selecting needed
point, press [F4](OK) and
enter input instrument height
screen. Complete all settings
and then back to
Pre-Settings screen.
[F4]
input
instrument
height
+
[ENT]
[F4]
2.3 Input the coordinates manually.
Steps:
1. Press [Coord.], enter input coordinate screen.
2. Input the point name and coordinates.
3. [OK] Save the station coordinates. And then input the instrument height.
Steps Key Display
ƻ
2 Press [F3](Coord.) in the
[Set STA] screen.
[F3]
ƻ
3
Input the point name and
the point’s coordinates. After
inputting one item, the
curser will move to next
input item.
Input point
name and
coordinate
+
[ENT]