Total Station Manual
62
ƻ
2 Press [F2](List) in the
[Set STA] screen.
[F2]
ƻ
3 Show the point list all
the fix points and measured
points of the current job.
ƻ
4 Select the needed point
through Up and Down key.
[View]: Show the
informations of this point.
[Coord.]: Input the
coordinate datas manually.
[Job]: Select datas from
another job.
Ė
Ę
[View]:
[Coord.]:
[Job]:
To Next Page
Loading...
