GeoMax ZOOM 10 - Manual Input Stakeout Point; [SO-PT]

Total Station Manual
64
ƻ
4 Press [F4](OK) to save
the coordinates of this point.
[F4]
ƻ
5Program
prompts"Saved!" Then enter
input instrument height
screen. Input the instrument
height and press [ENT] to
confirm. Then press
[F4](OK) to finish the
setting.
Input
instrument
height
+
[ENT]
[F4]
ƻ
6 Back to Pre-Settings
screen. The setting items that
have been made are marked
with *.
3. Setting the Orientation
The orientation can be input manually or determined from points that are either
measured orselected from the memory.
3.1 Manual input orientation
Steps:
1. Press [F1] and enter manual input screen.
2. Input the azimuth, prism height and point name.
3. Press [F1](ALL) to start measuring and set theorientation.
4. Press [REC] to record theangle and orientation.