GeoMax ZOOM 10 - 1.1 Create a New Job; 1.2 Select an Existing Job from Memory

Total Station Manual
38
3.3 Measurement
After all settings have been finished, you can start to measure. There are 3 pages
to display the result of measurement, including all measurement data and you can
press [PAGE] to view.
Steps Key Display
ƻ
1
Input the name of point
and instrument height.Move
the cursor to the next edit text
after entering each item. You
can enter Code when
necessary.
[ENT]
+
[ENT]
ƻ
2 Aim at the center of prism,
press [F1](ALL) or
[F2](DIST)+[F3](REC) to
start to measure and record the
measurement data. The
measurement data including
angle data, distance data and
coordinatedata.You can press
[PAGE] to view.
[F1]
or
[F2]
+
[F3]
ƻ
3
After finishing measuring
a point, program makes the
number of point add 1
automatically, aim at the
center of prism and repeat the
above steps to start next point
measurement.