Total Station Manual
66
ƻ
5 Back to Pre-Settings
screen. The setting items that
have been made are marked
with *.
3.2 Set orientation with coordinates
The determination of the direction value can also be carried out using a point
with a known coordinate.
Steps:
1. Press[F2]togotosetorientation with coordinates
2. Input the name of orientation point and find the point.
3. Input the prism height and determine it.
4. Use this point to set orientation.
¾ The orientation point can be select from memory or inputted manually.
Steps Key Display
ƻ
1
Press [F2] to select
Coordinate to Set orientation
with coordinates.
[F2]
ƻ
2
Find, select or input the
backsight point coordinates
andthengototheMeas.BS
screen.
Find,
select or
input the
backsigh
t point
To Next Page
Loading...
