GeoMax ZOOM 10 - 7.2 Delete Characters; 8. Point Search; 8.1 Direct Search

Total Station Manual
18
Number input box:
In number input box, user can only input numbers, include “1-9”,“.”, “-+”.
Number will appear in box when user presses the key.
Text input box:
In text input box, user can input numbers and letters. Repeat pressing same key to
get proper letter, such as A->B->C->7.
When right-bottom of screen display icon AB, user can input number/letter; when
display icon 01, user can only input number. User canpress soft-key [F4] to switch
input mode between Number and Text when input box beenactive.
z Letters:
Letters that total station can input includes “A-Z/$%_@&*?!+-.”.
¾ Arrow key
ĕ
,
ė
move inputing cursor.
¾ PressingENTentersediting; pressingENT confirms input after editing.
¾ When editing distance, angle, temperature and pressure values that containunit
format, input box’s text will convert into text without unit format. Such as angle
29
e
32
Ą
56
ą
transforms into 29.3256; Distance115.321m transforms into
115.321. When finish editing, the text will automatic convert back.
7.1 Input characters
Each digit key defines 3 letters and 1 number. In text input mode, each time
pressing the key, one character appears at cursor position. Number appears when
pressing 4 times.
Example: input 123ABV2
Steps Key Display
ƻ
1
Pressing key to start
inputing. Right-bottom
screen displaying icon 12
means in number input
mode.