Total Station Manual
51
5. Hidden Point
The function of Hidden Point is using a specia hidden point measuring rod to
measure the points which are not intervisible.
The length of measuring rod is known, by measuring the position informationof
prism 1 and prism 2 in the measuring rod and using mathematical methods to
calculate the coordinate of hidden point on the other side of the measuring rod.
Steps Key Display
ƻ
1 In the program of
Q-Survey, press [FNC] to
enter the menu of Function,
then pressing [PAGE] to open
the second page of Function
andthenpressing[F1]to
enter the function of hidden
point measurement.
[F1]
ƻ
2 In the interface of
measuring the first prism
point, pressing [F4] to enter
the interface of Rod Length.
[F4]
To Next Page
Loading...
