Total Station Manual
52
ƻ
3 Inputting the correct
value of Rod length and
pressing [F4] to back to
measure the first prism
point.
[F4]
ƻ
4 The instrument aims at
the prism on the top and
pressing [F1] to finish
measuring the first prism
and enter the interface of
measuring the second prism.
[F1]
or
[F2]
+
[F3]
ƻ
5
Aim at the second prism
and press [F1] to finish the
second prism’s
measurement. Start to
calculate the information of
hidden point now. If the
error is beyond the set
value, enter the step
ƻ
6
of
giving a prompt of error,
otherwise, enter step
ƻ
7
to
display the result of hidden
point measurement.
[F1]
or
[F2]
+
[F3]
ƻ
6 A prompt of error. Press
[F1] to enter the step
ƻ
7to
display the result of hidden
point measurement, press
[F4] to back to the step
ƻ
2
DŽ
[F1]
or
[F4]
To Next Page
Loading...
