GeoMax ZOOM 10 - 2.3 Grid Factor Setting; Computation Formula; Distance Calculation

Total Station Manual
23
ƻ
6 PresskeyF4tosearchthe
point in the selected job.
[F4]
Ć
1
[F2](Zero): Set N, E, Z to 0.
[F3](Coord.): Input point manually.
[OK] Commit selected point.
8.2 Wildcard search
The wildcard search is indicated by a “*”. The asterisk is a place holder for any
following sequence of characters. Wildcards should be used if the point number is not
fully known, or to search for a batch of points.
Examples:
* All points are found.
A All points with exactly the point number “A” are found.
A* All points containing “A” are found, for example, A1, A2, 1A.
Steps: (For example “*”)
Steps Key Display
ƻ
1 Choosing ‘Survey’ in
application menu, then choose
function ‘Set STA’. Entering
“*”, pressing ENT to finish
input, then pressing F1 to
search.
[F1]
ƻ
2 In searching result
window, using arrow key
Ė
Ę
to move cursor to select
point number. Press key F4 or
ENT to conirm selecting.
ĖĘ
[F4]
[ENT]