GeoMax ZOOM 10 - 6. Free Coding; 7. Laser Pointer; 8. Light; 9. Unit Setting

Total Station Manual
34
3. Start measurement
Q-Survey has 3 pages menu, including all measuring functions commonly used,
such as angle measurement, distance measurement and coordinate measurement.
As shown
below:
3.1 Set HA
You can set the horizontal angle as 0 or set it as wanted angle.
Set horizontal angle to 0.
Steps Key Display
ƻ
1 Aim at the target which
used to orient.Press [F4] twice
to enter third pages soft key.
[F4]
+
[F4]