Total Station Manual
67
ƻ
3
Aim backsight point and
then press [ENT].
Press [F1](ALL) or press
[F2](DIST) and [F3](REC) to
start measuring and finish
setting orientation. User can
also press [F3](REC) to finish
setting orientation without
measurement.
Press the [PAGE] key to
switch the display of
measured values screen and
backsight inspection values
screen.
[EDM]: Go to set EDM
settings.
[ENT]
[F1]
or
[F2]
ǃ
[F3]
ƻ
4 Back to Pre-Settings
screen. The setting items that
have been made are marked
with *.
4. Starting the Applications
The preset applications covers a wide range of measurement tasks.That makes
the daily field measurementeasier and faster. The all applications can be selected to
use are as follows:
z Surveying
To Next Page
Loading...
