GeoMax ZOOM 10 - 8. Tie Distance; 8.1 Polygonal

Total Station Manual
71
5.1 Individual Point
[IndivPt]:
In the data acquisition, point can be recorded individually. Press this keyto
switch the screens of Individual Point Measurement and Consecutive Point
Measurement.
Steps Key Display
ƻ
1 Press [F4](
Ę
)twiceto
display the last page of soft
keys.
[F4]
ƻ
2 Press [F2](IndivPt) to start
measuring individual point
function.
[F2]
ƻ
3 Input the individual point’s
name and prism height and
press [ENT] to move the
cursor to next input item.. If
needed, input the code.
Input
point
name,
prism
height
and code
+
[ENT]