Total Station Manual
40
Before REC: Record code data before recording the actual measurement data.
After REC: Record code data following after the actual measurement data.
Soft key of Code
After starting the function of soft key (Code), Screen displays the following:
GSI-the introduction of code properties:
Code: The name of code
Note: The additional note
Info1: The editable information of other contents
Info8: Other information
The introduction of soft key:
[Find]: Use the name of code or wildcard to find the needed code.
[New]: New a piece of editable information of code and use it.
[REC]: Record the current code data to the job and the code data not with any
measurement point binding at this time.
[OK]: Select the current code and use it.
Using the soft key of [Code] can select the code in the code library directly,it
will back to the interface of Q-survey after selecting, the code in the edit text of Code
is the selected code.
To Next Page
Loading...
