GeoMax ZOOM 10 - Page 80

Total Station Manual
79
ƻ
2
Press[PAGE]togoto
page 1/3(Default page). Press
direction key and move the
cursor to input prism height
item. Input the prism height
andthenpress[ENT]to
confirm.
[PAGE]
+
Ę
+
Input
prism
height
+
[ENT]
ƻ
3 Aim at the prism. Press
[F2](DIST) to start measuring
and calculate the differences
between measured point and
stakeout point.
[F2]
ƻ
4 Turn the instrument
telescope to make the
Ƹ
Hz
equal 0
e
00
Ą
00
ą
and
command the staff to move
the prism at the same time.
Arrows Meaning:
ĕ
: Look forward from station
and move the prism to the left.
ė
: Look forward from
statioand move the prism to
the right.
ƻ
5 While the
Ƹ
Hz equals
0
e
00
Ą
00
ą
,press
[F2](DIST) to start measuring
and calculate the differences
between measured point and
stakeout point.
The arrow’s direction is the
direction of the prism need to
[F2]