EasyManua.ls Logo

GeoMax Zoom80 Series - Distancer, Measurements Without Reflectors

GeoMax Zoom80 Series
194 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Directions Zoom80 | 125
6.6.3 Distancer, Measurements without Reflectors
General The EDM module built into the product produces a visible laser beam which
emerges from the telescope objective.
The laser product described in this section is classified as laser class 3R in
accordance with:
IEC 60825-1 (2007-03): "Safety of laser products"
EN 60825-1 (2007-10): "Safety of laser products"
Class 3R laser products:
Direct intrabeam viewing may be hazardous (low eye hazard level), in partic-
ular for deliberate ocular exposure. The beam may cause dazzle, flash-blind-
ness and after-images, particularly under low ambient light conditions. The
risk of injury for laser class 3R products is limited because of:
a) unintentional exposure would rarely reflect worst case conditions of
(e.g.) beam alignment with the pupil, worst case accommodation,
b) inherent safety margin in the maximum permissible exposure to laser
radiation (MPE)
c) natural aversion behaviour for exposure to bright light for the case of
visible radiation.

Table of Contents

Other manuals for GeoMax Zoom80 Series

Related product manuals