Description of the System Zoom80 | 13
EDM Electronic Distance Measurement
EDM refers to the laser distancer incorporated into the
instrument which enables distance measurement.
Three measuring modes are available:
• IR mode. This mode refers to the ability to measure
distances to prisms.
• RL mode. This mode refers to the ability to measure
distances without prisms.
• LO mode. This mode refers to the visible red laser and
the ability to measure extended distances to prisms.
accXess10 accXess10 refers to the Reflectorless EDM technology which
enables an increased measuring range with a smaller laser
spot size.
NavLight A Navigation Light fitted to an instrument assists with prism
targeting. It consists of two differently coloured flashing
lights located in the instrument telescope housing. The
person holding the prism can align him/herself into the
instrument’s line of sight.
Aim360 Aim360 refers to the instrument sensor which enables the
automatic fine pointing to a prism.
Term Description
To Next Page
Loading...
Need help?
General
