Zoom80 | 4Introduction
Validity of this
manual
Description
General This manual applies to all Zoom80 series instruments and
Zoom80 C controller. Where there are differences between the
models they are clearly described.
Telescope • Measuring with IR mode: When measuring distances to
a reflector with EDM mode "IR", the telescope uses a wide
visible red laser beam, which emerges coaxially from the
telescope's objective.
• Measuring with RL mode and LO mode: When meas-
uring distances with EDM modes "RL" and "LO", the tele-
scope uses a narrow visible red laser beam, which
emerges coaxially from the telescope's objective.
To Next Page
Loading...
